Product Description
Oxygen based pond cleanser have long been used in decorative ponds and water features to clean rocks, waterfalls and streams. This same great formula is also available in larger sizes for use in earthen ponds and lakes.
Application for waterfalls and streams:
Turn the pump off and apply light layer of product. Apply approximately 1 lb. of powder for every 300-400 square feet to problem areas, such as rocks and waterfalls. Wait 10-20 minutes before turning pump back on.
Pond application:
Heavy Dose: Apply 3-4 oz. per 1000 gallons of pond water every 2-4 weeks or as needed. Light Dose: Apply 1-2 oz. per 1000 gallons of pond water every 2-4 weeks or as needed. Allow 48 hours between consecutive applications. Avoid contact with plant leaves. Product may cause short term spikes in pH levels, check pH before applying.
Larger pond application:
Treat no more than 1/3 of pond at a time. Apply 12 to 15 lbs per acre-foot of water. Double dosage for problem areas may be used.
- Quickly and effectively cleans rocks, waterfalls, pondless features, fountains, statues, plant pots, etc.
- Powdered formula brings powerful oxygen based cleaning to large ponds or lakes as well as smaller koi ponds, water gardens and aquariums
- Great for use with fish, birds, pets and wildlife
- Works immediately upon application
- Lifts debris to pond surface where it can be removed by net or skimmer
- For spot treating use 2-3 pounds per 1000 square feet, for pond application use 12-15 pounds per acre-foot of water - a double dose can be used for problem situations
- Treat no more than 1/3 of the pond at a time
- Allow 48 hours between consecutive applications
Application for waterfalls and streams:
Turn the pump off and apply light layer of product. Apply approximately 1 lb. of powder for every 300-400 square feet to problem areas, such as rocks and waterfalls. Wait 10-20 minutes before turning pump back on.
Pond application:
Heavy Dose: Apply 3-4 oz. per 1000 gallons of pond water every 2-4 weeks or as needed. Light Dose: Apply 1-2 oz. per 1000 gallons of pond water every 2-4 weeks or as needed. Allow 48 hours between consecutive applications. Avoid contact with plant leaves. Product may cause short term spikes in pH levels, check pH before applying.
Larger pond application:
Treat no more than 1/3 of pond at a time. Apply 12 to 15 lbs per acre-foot of water. Double dosage for problem areas may be used.