Kasco Marine’s 3.1JF (Single Phase) and 3.3JF (3 Phase), 3 hp
Floating Decorative Fountains provide the power needed to adequately
aerate larger ponds and provide eye-catching decorative displays.
Each 3.1JF & 3.3JF is supplied with 5 different interchangeable
nozzles, providing you with the versatility of 6 different patterns for
displays of up to 24 feet in height or 45 foot in diameter. You can
easily change nozzles to fit the specific pond dimensions, wind
conditions and the desired aesthetic effect. The 3.1JF is available
with an extremely efficient 240 volt Single Phase, 60 Hz motor. The
3.3JF is available with an extremely efficient 208/240V 3 phase, 60Hz
motor. 50Hz versions also available.
The 3.1JF is supplied with a state-of-the-art GFCB protected control
panel, model C-85. The 3.3JF, 3 phase unit is supplied with a simple to
use, all inclusive GFI protected 3 phase control panel, model CF-3235.
Add a Fountain Lighting Package to the 3.1JF or 3.3JF to extend its
beauty into the nighttime hours. The 3.1 JF & 3.3JF boasts an
innovative float design with a low profile in the water for enhanced
appearance, plus an attractive decorative shape.
Note: The price and ordering information on this page is for the single
phase 240v fountain. Please call Living Water Aeration if you require
the 3 phase version of this fountain.
The Kasco 3.1JF Includes These 6
- Multiple Patterns in One Unit: Custom-configure the unit to
the exact project needs and your personal tastes.
- Efficient / Low Power Use: Highest efficiency design for
low power consumption versus competing units. Reduces operating costs
over the entire life of the unit. 13.4 running amps on a 240V single
phase circuit or 10.3 amps on a 208/240V, 3 phase circuit for low
- Clog Resistant: Unique water-deflecting nozzle design gives
you the most clog-resistant model on the market. Successful shallow
water operation in as little as 24″
- Rugged Motor: Environmentally friendly design with a
hard-face internal mechanical seal for protection against leaks.
Long-life top and bottom ball bearings. Flood oil lubricated for
excellent heat dissipation.
- Corrosion Resistant: Superior dependability in salt-water
or other corrosive environments. All external metal motor, float, and
hardware components are of stainless steel composition and protected by
a sacrificial zinc anode.
- Low Maintenance: Clean the motor housing once or twice per
year and replacing the sacrificial zinc anode when visibly corroded.
- Fully Tested: ETL listed to stringent UL and CSA Safety
- Ships Easily: Via UPS in 4 or 5 boxes (add 1 box for lights)
- Choice of Cord Lengths: SJTOW or SOOW underwater rated
power cord length options of 50′, 100′,
150′, 200′, 250′, 300′, or
400′ (500′ special order) Includes three
50′ braided nylon mooring ropes.
- Made in the U.S.A.
- 3 YEAR WARRANTY