Free Shipping on Orders Over $99

Fire Fountain HB-12'' Manifold with Auto Fire Ignition System

Item #: HB12-NG
OUR PRICE: $2,358.00
Choose Gas

Fire Fountain HB-12" Manifold

If you’re into theatre and want to set a special mood, then the fire fountain is definitely for you. This impressive piece of engineering will impress your guests, and keep any party outside. The fire fountain diffuses gas over the water surface in your fountain, and as it burns, it gives the magical effect of the water being on fire. It’s definitely one of the coolest special effects you can get in a pond or fountain! The Fire Fountain Manifold is built for constant use and is an amazing addition to any fountain that’s in your home or business - what an amazing way to complete your landscaping design!

This unit needs only 1PSI of propane or natural gas. You can have it hooked up to your utility provider’s gas (definitely NOT a DIY job!)  If you’re installing it in a fountain, the depth needs to be at least 9 inches deep - but the closer the manifold is to the surface, the better the effect. This product has a one year warranty. With proper hookups in place, the manifold itself takes about 10 minutes to install. It’s a rust-free system, with the manifold completely made out of stainless steel.

What’s included:

  • Stainless steel manifold
  • Check valve


Q: How much gas pressure does it take to operate a Submersible GV Unit?
A: Submersible Units require at least 1 PSI to operate properly.

Q: How deep should I put the manifold below the surface of the water?
A:The closer the manifold is to the surface of the water, the better the performance.

Q: How large does the supply line have to be to the manifold?
A: 7 - 12" manifolds may run off of a 1/4" supply line. The gas line will never be larger than 1 1/4" for the larger submersible units.

Q: How do I keep water out of my supply line?
A: The Submersible GV Units are designed with a vapor locking system and an in-line check valve to ensure that no water fills the gas line, giving you constant gas pressure.

Q: Does the system run on natural gas?
A: Yes. Our system runs on natural gas and requires a high output meter that will be supplied by your gas carrier at no cost to the customer. The customer will need to get a high pressure regulator installed to the fire feature with a pressure regulated spring rated at 3 - 6 PSI.

Q: Can this system operate on propane?
A: Yes. Our system runs on propane and needs to be equipped with a high output regulator supplied by your gas provider. It needs to be rated for at least 3 PSI and up.

Q: Can this unit burn indoors?
A: No.

Q: How long does the system last?
A: There is a one year warranty on the stainless steel material and the tips. The system is very durable and is built to last.

Q: How long does it take to install?
A: Each Submersible Unit should take about 10 minutes to install.

Q: What material does the manifold consist of?
A: 316 stainless steel material.

Note: Always stand UPWIND when lighting any fire feature.