Note: Auto Igniter(pictured) is not included with manifold and must be
purcahsed separtely here.
fire and water features currently on the market only offer the
illusion of fire and water combined. These fire fountains are the "real
deal"! Our unique product has the flames
emanating directly out of the water, giving the enchanting effect of
fire dancing on the surface of the water. With this manifold kit you
can literally transform almost any ordinary fountain into a fire
The bowl needs to be 9" deep for the SUBEIS with manifold.
Bowl needs to be 4" deep for the manifold only.
This kit includes:
FREQUENTLY ASKED QUESTIONS
Q: How much gas pressure does it take to operate a Submersible GV Unit?
A: Submersible Units require at least 0.75 PSI to operate
Q: How deep should I put the manifold below the surface of the water?
A:The closer the manifold is to the surface of the water, the better
Q: How large does the supply line have to be to the manifold?
A: 7 - 12" manifolds may run off of a 1/4" supply line. The gas line
will never be larger
than 1 1/4" for the larger submersible units.
Q: How do I keep water out of my supply line?
A: The Submersible GV Units are designed with a vapor locking system
and an in-line check valve to ensure that no water fills the gas line,
constant gas pressure.
Q: Does the system run on natural gas?
A: Yes. Our system runs on natural gas and requires a high output meter
that will be supplied by your gas carrier at no cost to the customer.
will need to get a
high pressure regulator installed to the fire feature
with a pressure
regulated spring rated at 3 - 6 PSI.
Q: Can this system operate on propane?
A: Yes. Our system runs on propane and needs to be equipped with a high
output regulator supplied by your gas provider. It needs to be rated
least 3 PSI and up.
Q: Can this unit burn indoors?
Q: How long does the system last?
A: There is a one year warranty on the stainless steel material and the
tips. The system is very durable and is built to last.
Q: How long does it take to install?
A: Each Submersible Unit should take about 10 minutes to install.
Q: What material does the manifold consist of?
A: 316 stainless steel material.
Q: How do I manually light a Fire Fountain or a fire feature?
A: A Fire Fountain or fire feature may be lit manually with a control
valve close to the feature.
Note: Always stand UPWIND when lighting any fire feature.
Is SUBEIS the electronic igniter?
How deep does water need to be for XR-7 manual light
Yes the SUBEIS is the electronic igniter. For manual igniting you will want to position the manifold just below the surface of the water. Typically a few inches deep is the most you would want to go below the surface for the best fire on water display.